BAUMALIGHT DSM230 Manual Rotation Tree Saw for Mini Skid steers

DSM230 Manual Rotation Tree Saw for Mini Skid steers

Perfect for landscapers or land owners who need to make quick work of cutting though shrubs and limbs, Baumalight's DSM230 Tree Saw is hydraulically-driven and designed for mini skid steers. For full versatility, the DSM230 cutting head can be manually rotated 90 degrees for either horizontal or vertical cutting. With heavy-duty construction and multiple motor options, the DSH230 offers replaceable carbide-tipped teeth which can be rotated up to three times for renewed cutting performance.

FEATURES

• MANUAL ROTATING CUTTING HEAD

  Effectively switch from horizontal tree cutting position to vertical trimming and limbing position with the 90 degree manual rotating head. Simply remove the 8 bolts at the base of the cutting head, rotate the unit 90 degrees to the left or the right and then secure the bolts. 

• Heavy duty build

  The tree saw’s durable design and quality materials combine to create a saw that is able to stand up to the demanding work of cutting limbs and trees.

• Clean Cuts

  The tree saw makes clean work of limbing and trimming trees safely and quickly, leaving pruned trees with a clean cut.

• Mount Angle

  DropSaw's skidsteer plate is on a roll back angle. This gives you even more flexibility to successfully trim areas that are difficult to reach.

• Saw blade shielding

  The durable shield encloses the blade for protection, directing the chips as it easily cuts through limbs and trees.

• Blade mounted on heavy duty bearing support

  The tree saw's blade is mounted on an overhung load adapter, which is designed with tapered roller bearings and built to stand up to the rigors of sawing limbs and trees. The overhung load adapter keeps the blade spinning in the toughest trimming conditions.

• Available with Gear motor or BENT AXIS PISTON MOTOR

  Gear motors are a good cost effectvie choice for the average user and our Industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for pruning, trimming and land clearing. Built to last, these reliable motors can double the power of your output flow.

• CASE DRAIN – VENT TO ATMOSPHERE

  To prevent pressure relief activation on the motor seal, the DXA530 comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you. A properly installed case drain protected by a vent to atmosphere relief valve will save the work of replacing your shaft seal and save you from down time of unexpected maintenance. 

• FRONT PUSH BAR

  A solid serrated steel plate up front helps guide limbs, branches and small trees safely away from the operator.

• ANGLED PUSH BAR WITH PROTECTIVE MESH

  The large push bar with integrated safety mesh is angled to help guide any falling debris away from the operator.

• AR400 STEEL BLADE

  The tree saw’s heavy duty circular blade is designed and shaped from AR-400 steel. This abrasion resistant steel is rugged and ready for the abuse of a long service life.

• HIGH SPEED TEETH

  The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

• EASY TEETH CHANGING

  The high speed teeth design allows for easy rotation and changing of the teeth as needed.

• Designed for maximum visibility

  Making sure you have the best seat in the house, the tree saw was designed with maximum visibility in mind, allowing you to make cleaner and better cuts.

• PROTECTIVE POWDER COAT FINISH

  Heavy duty construction and a durable powder coated finish.

• Easy Access Panels for Service

  Built for the long haul, the tree saw has multiple removable panels for easier access and servicing.

• INTERNAL HOSE ROUTING

  All of the hydraulic hoses on the DropSaw are sleeved for operator and hose protection while the connecting hoses are sleeved and wrapped in hose armour for double protection. The hoses are then routed internally, keeping them out of harm’s way. The DropSaw also features a pivoting arm with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.

• Hoses double shielded

  All of the hydraulic hoses are routed internally where possible and sleeved for operator and hose protection, while the connecting hoses are sleeved and wrapped in hose armor for double protection.