02A-12
4/24
Cemetery / Bellhole bucket is specifically designed for digging straight vertical walls. This design of bucket is typically needed for digging graves. The Bellhole Bucket has rotation incorporated into the design that enables the operator to dig the straight vertical walls as well as a flat bottom.
MOUNTING: PIN ON, KUBOTA, WEDGE LOCK, BOBCAT EXCHANGE |
|||
SIZE | CAPACITY | LBS | TEETH |
12" | 1.9 |
271 | 3 |
18" | 2.8 | 328 | 4 |
24" | 4.2 | 373 | 5 |
30" | 5.6 | 439 | 6 |
36" | 7.4 | 478 | 7 |
38" | 7.9 | 486 | 7 |
40" | 8.4 | 513 | 8 |
MOUNTING: TAG, CP, GANNON ELIMINATOR WAIN ROY ORIGINAL, WAIN ROY XLS |
|||
SIZE | CAPACITY | LBS | TEETH |
12" | 2.0 | 165 | 3 |
16" | 2.7 | 185 | 3 |
18" | 3.0 | 195 | 3 |
24" | 4.4 | 250 | 4 |
30" | 5.9 | 285 | 6 |
36" | 7.3 | 330 | 7 |
MAKE | MODELS: 8 TON, 12500-20000 LB EXCAVATOR |
BOBCAT | 442, 442S, E85 |
CASE | CX75C SR, CX75SR, CX80C |
CAT | 307D, 307EX, 308D CR, 308D CR-SB |
COYOTE | DX80, DX85R-3 |
DOOSAN | DX80, DX85R-3, S075-V, S70-V, S75-V |
DITCH WITCH | |
GEHL MUSTANG |
Z80 GEN: 2 | 800Z NXT2 |
HITACHI | ZX75US‑5, ZX85USB‑5 |
HYUNDIA | R80CR-9, R80CR-9A |
IHI KATO | 70Z |
JCB | 67C-1, 86C-1, 85Z |
JOHN DEERE | 70, 70D, 75C,80, 80C, 85, 190E |
KOBELCO |
70SR, 80CS |
KOMATSU |
PC78MR-6, PC78US-6, PC78US-8, PC78US-10, PC78UU-6 |
KUBOTA |
KX057‑4 |
LIUGONG | CLG906D |
MECALAC | 6MCR, 8MCR, 8MCR RR |
NEW HOLLAND |
EH70, EH80 |
SANY |
SY75C‑TIER 2, SY75C‑TIER 3, SY75C‑TIER 3 (EU), SY75C‑TIER 3 (US), SY75C‑TIER 4F, SY80C-9S |
TAKEUCHI |
TB68S, TB070 |
TEREX | TC75 (HR32) |
THOMAS | T75 |
VERMEER | |
VOLVO | ERC88 |
YANMAR |
B7 5A, SV100-2A, Vi08 |