ZW50-5B-005280
FINANCING AVAILIBLE
SHIPPING: Must be quoted, flat bed or hot shot
YEAR | 2021 |
MANUFACTURER | Hitachi |
MODEL | ZW50-5B |
HOURS | 760 |
CONDITION | Used |
ENGINE SPECS | |
Gross power (ISO 14396) | 44 HP/2,400 RPM (32.8 kW/2,400 RPM) |
Net power (ISO 9249) |
42 HP/2,400 RPM |
Make/Model |
Kubota D1803-CR-TIE4 diesel engine |
Type |
4-cycle, water-cooled, direct injection with |
Fuel type |
#2 Diesel (Requires ultra-low sulfur fuel.) |
Fuel injection pump |
Electronically controlled, common rail type |
Governor |
All speed electrical type |
Cooling module type |
Forced circulation type |
Number of cylinders |
3 |
Bore and stroke |
3.4" x 4.0" (87mm x 102.4mm) |
Total displacement |
112 in3 (1.83 liters) |
Alternator |
DC 12V-70A (8.4 kW) |
Air cleaner |
Dry type (double element) with |
Starter motor |
DC 12V–2.7 HP (2.0 kW |
Battery |
12V–800 CCA (70Ah), 2 units |
TRANSMISSION SPECS | |
Transmission | Hydrostatic transmission (HST) automatically controls power and 2-speed |
Speeds: Forward |
Low: 5.0 MPH (8.0 km/hr) Auto: 10.6 MPH (17.0 km/hr) |
Speeds: Reverse |
Low: 5.0 MPH (8.0 km/hr) Auto: 10.6 MPH (17.0 km/hr |
SYSTEMS REFILL CAPACITY | ||
LOCATION | GALLONS | LITERS |
Fuel tank (diesel fuel) | 11.1 | 42 |
Engine lubricant (including oil pan) |
2.0 | 8 |
Engine coolant | 1.7 | 7 |
T/M | 0.5 | 2 |
Axle (front/rear) | 1.2/1.2 | 5/5 |
Hydraulic oil tank | 7.1 | 27 |
HYDRAULIC AND STEERING SYSTEM | |
Steering type | Articulated frame steering. Full hydraulic power steering unit, pilot operation |
Steering mechanism | Double-acting piston type |
Lift (boom) cylinder | Two (2) double-acting piston type: 2.8" x 20.9" (70mm x 531mm) |
Tilt (bucket) cylinder | Two (2) double-acting piston type: 2.8" x 17.7" (70mm x 450mm) |
Steering cylinder | Two (2) double-acting piston type: 2.4" x 9" (60mm x 228mm) |
Main oil pump | 13.9 GPM/1,000 PSI @ 2,400 RPM (52.7 LPM/20.6 MPa @ 2,400 RPM) |
HST charging pump | 4.0 GPM/3,260 PSI @ 2,400 RPM (15.3 LPM/2.5 MPa @ 2,400 RPM) |
Relief valve set pressure |
2,987 psi, 20.6 MPa (210 kgf/cm2) |
HYDRAULIC CYCLE TIME* front end loading, Z bar linkage system | |
Lifting time (at full load) | 5.0 sec. |
Lowering time (empty) | 3.0 sec. |
Bucket dumping time | 1.0 sec. |
total | 9.0 sec. |
AXLE SYSTEM | |
Drive system | 4-wheel drive |
Front and rear axle | Semi-floating type, fixed to the front frame, trunnion support |
Tires | 15.5/60-18 8PR (L-2) |
Reduction and differential gear |
Limited slip differential (LSD) |
Final reduction gear | Inboard mounted, heavy duty planetary gear |
Oscillation angle | Total 16 (+8, –8)° |
BRAKE SYSTEM | |
Service brakes | Wet disc in reduction gear box |
Parking/Emergency brake | Spring-applied, hydraulically-released wet disc |