Your Cart is Empty
XBC42-25
VIRNIG X30 rotary brush cutter for excavator
$0.00 - $8,810.00
Revised 2/24
X30 Mini Excavator Rotary Brush Cutter
Cut up to 4″ diameter trees and access hard to reach areas for a maintained finish.
- NO CASE DRAIN REQUIRED. DIRECT DRIVE EATON® MOTOR WITH RELIEF VALVE PROTECTION
- UNIQUE BOLT-ON FRONT DECK. REMOVE FOR 270-DEGREE BLADE ENGAGEMENT
- BOLT-ON MOUNTING INTERFACE FOR QUICKLY CHANGING HANGER BRACKETS
- ROUNDED FLYWHEEL WITH 3 DOUBLE-SIDED BLADES BOUNCES OFF STUMPS
- SERRATED REAR DECK FOR BACK DRAGGING BRUSH & GRUBBING STUMPS
- STANDARD MOTOR GUARD & SPINDLE GUARD
- VARIOUS HANGER BRACKETS AVAILABLE TO FIT MOST EXCAVATOR BRANDS
* DO NOT OPERATE CUTTER WITHOUT A SHATTERPROOF CAB ON MACHINE. PROTECT THE OPERATOR AND THE PEOPLE AROUND THE MACHINE.
| MODEL | XBC42 | XBC48 | ||
| Cut Width (Inches) | 42.0 | 48.0 | ||
| Overall Width Without Sides / With Sides (Inches) | 38.8 / 52.0 | 44.9 / 58.0 | ||
| Overall Height (Inches) | 20.5 | 21.5 | ||
| Overall Depth (Inches) | 52.5 | 58.5 | ||
| Deck Height (Inches) | 5.8 | |||
| Minimum Cut Height with Bolt-On Front (Inches) | 2.0 | |||
| Cutting Capacity, Diameter (Inches) | 4.0 | |||
| Deck Thickness: Top/Side (Inches) | 0.25 | |||
| Recommended Flow Rate (GPM) | 15-25 / 22-28 | 15-22 / 22-28 / 28-35 / 35-38 | ||
| Approximate Weight Without Sides / With Sides (Pounds) | 700¹ / 830¹ | 815¹ / 965¹ | ||
| Recommended Mini-Excavator Lift Capacity Over Side at Max Reach | Greater than 700 pounds² | Greater than 815 pounds³ | ||
| Recommended Mini-Excavator Weight (Pounds) | 8900-26000 | 11000-26000 | ||
| Number of Teeth (Optional) | 12 | 18 | ||
¹Weight does not include hanger bracket or pins.
²Greater than 765 pounds with one side curtain and 830 pounds with both side curtains.
³Greater than 890 pounds with one side curtain and 965 pounds with both side curtains.
BLADE TIP SPEEDS (FPM)
Standard Flow Model
| MODEL | 15 GPM | 22 GPM | 25 GPM | 28 GPM |
| XBC42-25 | 9,525 | 13,970 | 15,875 | – |
| XBC42-28 | – | 9,010 | 10,240 | 11,470 |
| XBC48-22 | 10,885 | 15,965 | – | – |
| XBC48-28 | – | 10,300 | 11,705 | 13,110 |
| MODEL | 28 GPM Minimum | 35 GPM Maximum |
| XBC48-35 | 10,290 | 12,860 |
| MODEL | 35 GPM Minimum | 38 GPM Maximum |
| XBC48-38 | 10,265 | 11,143 |
Flow rates in gallons per minute (GPM) and blade tip speeds in feet per minute (FPM).
ONE BOLT-ON SIDE CURTAIN
- Installed on the left side to reduce debris thrown toward the operator.
TWO BOLT-ON SIDE CURTAINS
- Completely enclose the cutter for max debris containment.
CARBIDE TEETH
- Shred material for a better finish.
BOLT-ON HANGER BRACKET
- Many options available.
- Please contact for hanger pricing and availability.
This is a guide. Please call if you have questions.
| BOBCAT |
335, 337, 341, 435, E40R2, E42, E45, E48, E50, E55, E58, E60 E63, E88, E145, E165 |
| CASE | CX40, CX42, CX45, CX50, CX57C, CX60C, |
| CAT |
304, 304CR, 304.5, 303.5CR*, 304.5E2XTC, 304CCR, 304E2CR, 305CR 305.5DCR, 305.5ECR, 305.5E2CR, 305CCR, 305DCR, 305ECR, 306 CR |
| DEVELON | DX50-5K, DX50Z-7, DX55, DX55R-7, DX55W, DX60R, DX62R-3*, DX63-3* |
| GEHL | 603, 503Z, Z45, Z45GEN2, Z55 |
| HITACHI |
ZX40, ZX40U-2, ZX40-3F, ZX48U-3, ZX48U-5, ZX50, ZX50U, ZX50U-2 |
| HYUNDAI | R55-9, R55-9A, R60CR-9, R60CR-9A |
| JCB |
803, 8040, 8045, 8050, 8052, 8055, 8065, 45Z-1, 48Z-1, 50Z, 50Z-1, 51R 55Z, 55Z-1, 57C-1 |
| KATO / IHI | 55V-4, 60V-4, HD50V-5, HD55N-4, HD60V-5 |
| KOBELCO | SK45SRX-6E, SK45SRX-7, SK55SRX-6E, SK55SRX-7 |
| KOMATSU | PC45MR-3, PC45MR-5, PC55MR-3, PC55MR-5 |
| KUBOTA |
KX040-4, KX057-4, KX057-5, KX080-4, KX121-3S, U35-4, U48-4, U48-5 U55-4, U55-5 |
| MUSTANG | ME5003ZT, ME6003 |
| NEW HOLLAND | E55BX, E57C |
| SANY | SY50U, SY60C, SY80U |
| TAKEUCHI |
TB045, TB145, TB153FR, TB240, TB250, TB250-2, TB257FR, TB260, TB350R TB370 |
| TEREX | TC48, TC50, TC60 |
| VOLVO | EC45, EC55B, EC55C, EC55D, ECR40D, ECR48C, ECR50D, ECR50F, ECR58F ECR60E |
| WACKER | ET58, ET65, EW65, EW65, EZ50 |
| YANMAR |
SV40, SV60-6B, VIO45-5, VIO45-6A, VIO50-6A, VIO50-6B, VIO55-5 VIO55-6A, VIO57-6B |